Shipstation - Configuration (Chrome Extension)

Created by Karthikeyan Janakiraman, Modified on Fri, 26 Sep, 2025 at 9:58 PM by Mohammad Riyan Khan

Please find the below custom fill & additional integration barcode field configuration of ShipStation WMS 


Step - 1: Download chrome extension and configure the userid, secretid and system token. Please find the KB article for same below:

KB Articles:

How to Obtain userid, secretid and system token from Forge

How to configure Chrome Extension


Step - 2: In profile configuration section, Click on "ADD PROFILE" & configure the settings as listed below.


          A. Profile name - ShipStation Pack station

          B. URL - https://ship14.shipstation.com/orders, 

          C. Preferred Unit - in-lb-oz

  


          D. Load Barcode Text - No IFrame Page - Enable load barcode text 

           Selector - /html/body/div[3]/div/div/div/div[4]/div[2]/div[2]/div/div/div[1]/div[1]/div[3]/h4


          E. Enable the check-box of Is AutoSave Enabled In WebPage?


          F. Select the Measurement field fill method - Custom Fill

                        

Flow Config -  

PUT input[aria-label="length input"] **length**

| FOCUS input[aria-label="length input"]

| DELAY 300

| PUT input[aria-label="width input"] **width**

| FOCUS input[aria-label="width input"]

| DELAY 300

| PUT input[aria-label="height input"] **height**

| DELAY 300

| FOCUS input[aria-label="height input"]

| PUT input[aria-labelledby$="pounds"] **actualWeight**

| FOCUS input[aria-labelledby$="pounds"]

| DELAY 300

| PUT input[aria-labelledby$="ounces"] **auxiliaryActualWeight**

| FOCUS input[aria-labelledby$="ounces"]

| DELAY 300

| TAB input[aria-labelledby$="ounces"]



Step - 3: Click on "SAVE PROFILE" to save the ShipStation Profile configuration.


Step - 4: Go to the ShipStation WMS order page & Open the chrome extension shortcut to Trigger the measurement (Click on Measure button).


Step - 5: The dimensions and weight will automatically populate in ShipStation WMS.


ShipStation WMS is successfully integrated with vMeasure device. 


If you need any support, please drop a mail to vmeasure@visailabs.com or Click Here to Summit a Ticket.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article