Different ways Automated Barcode Scanner can interface with the vMeasure device

Mainly there are 2 ways the Automated Barcode Scanner can interact with the vMeasure device:

1. LAN connection (Ethernet / Wi-fi): You can connect the Automated Barcode Scanner through Network connection using an RJ-45 (Ethernet Cable) or through a Wi-Fi network.
   
   Note: Both vMeasure and Automated Barcode scanner should be connected on the same network.
    
2. USB Serial Connection: The vMeasure device & Automated barcode scanner can be connected through USB A type cable to USB A type cable. Once end should be connected in vMeasure device & other end should be connected in Automated barcode scanner.
   
   Note: Required a specific USB A type to USB A type cable which will be provided by VisAI Labs team.