How to Make a Direct Network Connection Between vMeasure Ultima and ABS

Created by Shri Sailesh, Modified on Thu, 1 Jan at 11:33 AM by Shri Sailesh

How to Make a Direct Connection Between vMeasure Ultima (VHU) and ABS

Step 1: Connect the Wi-Fi adapter to the vMeasure Ultima device.
Step 2: On the vMeasure Ultima, go to Settings → Network.
Step 3: Select Wi-Fi and turn the Wi-Fi option ON.
Step 4: Tap Show Networks, select the appropriate Wi-Fi network, enter the password, and click Save.
Step 5: Connect the LAN cable between vMeasure Ultima (VHU) and ABS

Configure ABS for Direct Connection

Step 6: On the ABS device, navigate to Connection Settings.

Set Connection Type to LAN Connection (Ethernet / Wi-Fi).
Set Network Connection to Direct Connection.

Finalize Configuration on vMeasure Ultima

Step 7: Return to vMeasure Ultima and open the Network Settings page.
Step 8:

Set Primary Network to Wi-Fi.
Set Share Network Over to LAN.
Click Save.

Note:

Once the configuration is completed successfully, you will see a link/chain symbol on the top of the vMeasure screen, indicating that the direct connection between VHU and ABS is active.